The anodisation of aluminium monoliths was performed in order to generate an alumina layer that ensures a good adherence of the catalysts. In this study, it is demonstrated that the morphology of the produced alumina layer depends on time, temperature, current density and concentration of the selected electrolyte. When anodisation process with the extreme conditions…
Al-Fe pillared bentonite and gold supported on Al-Fe pillared bentonite catalysts deposed on Fecralloy monoliths have been prepared, characterized and tested in two oxidation reactions: gaseous oxidation of CO and phenol oxidation in aqueous medium. The deposition of the solid on the metallic substrate does not alter its structural characteristics. The use of monoliths improves…
Manganese oxides having 2 × 2 tunnel structures (cryptomelanes) have been synthesized by a milling method in order to test their efficiency as catalysts for the abatement of volatile organic compounds, using toluene as probe molecule. These materials present excellent textural properties, arising from the nanofiber morphology and were active for toluene total oxidation. DRIFTS…
Superduplex stainless steels (SDSSs) combine the good mechanical behavior and the high corrosion resistance of the ferrite (α-Fe) and austenite (γ-Fe) phases. The SDSSs properties depend strongly on the partitioning of the elements that form the alloy. The ferrite is generally enriched in P, Si, Cr and Mo while the content of Ni, Mn, Cu…
A computational fluid dynamics (CFD) study of the thermal integration of the steam reforming of methanol (SRM) and the combustion of methanol in a catalytic microchannel reactor is presented. This issue is of interest for in situ H2 production for portable power units based on low-temperature PEM fuel cells. Three-dimensional simulations have been carried out…
The thermal treatments of austenitic stainless steels monoliths were studied in order to generate a highly homogeneous and rough oxide scale strongly attached to the base alloy, which will subsequently ensure the good adherence of the catalysts. In this work it has been shown that the morphology, integrity and homogeneity of the scale are strongly…
This work reports the synthesis, characterization and catalytic activity for CO oxidation of gold catalysts supported on calcium hydroxyapatite. On both, the hydroxyapatite support and the gold-supported hydroxyapatite catalyst, the CO conversion shows a peak near 100% of conversion at room temperature. The generation of structural vacancies by interaction of CO with the solid provokes…
A series of Ce1−xEuxO2−x/2 mixed oxides was synthesized by coprecipitation. The solids were characterized by means of XRF, SBET, XRD, UV−vis, and Raman techniques, and their catalytic activities toward CO oxidation were tested. A solid solution, with CeO2 F-type structure, is formed for europium contents (measured as Eu2O3 by XRF) ≤20% wt. For higher contents,…
This paper proposes a new methodology for the modification of clays with the mixed Al–Fe and Al–Ce–Fe systems, which involves the synthesis of solid polymeric precursors and their use as pillaring agents in the modification of clays. The process of intercalation of clay with Al13, Al13 + Fe and Al13 + Ce + Fe nitrate…
Calcination and evacuation of a Au/FeOx/CeO2 catalyst at 573 K leads to reduction of the deposited gold to metal. This metal state is stable under oxygen and only at 573 K some metal atoms are oxidized to Auδ+ sites (Au+ cations situated on metal gold particles). However, even at room temperature, gold is readily oxidized…