A series of gold nanoparticles in the 4-40 nm range were prepared, immobilized on activated carbon and further tested, at low base concentration, in the catalytic oxidation of 5-hydroxymethyl furfural (HMF) to 2,5-furandicarboxylic acid (FDCA). Gold particles size variation has no influence on HMF conversion but significantly affects product selectivity and carbon balance. This behavior…
In this work series of photocatalysts based on ZnO modified by Au and Ag2CO3 addition and Ag–TiO2 materials were synthesized and evaluated in the treatment of handicrafts factories wastewater and water samples taken from a highly polluted river. In general, it was found that ZnO series were more effective in the bacteria elimination than the…
In this work, a previously optimized synthesized ZnO photocatalyst was modified with different molar percentages of Ag3PO4 through a facile in situ precipitation–deposition method and then characterized by different techniques (XRD, XRF, BET, UV–vis DRS, SEM, TEM and XPS). The incorporation of Ag3PO4 produces important changes in the light absorption properties with a significant absorbance in the…
Gold is without a doubt the best known metal for chemical oxidation. The noblest of the noble metals gained its place because of its resistance to overoxidation, low temperature of operation, especially in gas-phase oxidation, and fairly good selectivity when required. The aim for sustainable development and the need for new technologies open the possibility…
The mechanochemical process denoted as a mechanically induced self-sustaining reaction was successfully applied in obtaining Mn-doped ZnS samples with Mn content between 0 and 5 mol%. The process consists in milling Zn/Mn/S powder elemental mixtures with the appropriate stoichiometry, which promotes after approximately 80 min the induction of a combustion reaction. The doping level was…
Several works have recently demonstrated that perovskite nanocrystals can be controllably formed within a variety of porous matrices employing diverse synthetic strategies. By means of the fine tuning of the pore size distribution, the thickness and composition of the walls, the geometry of the void network and its topology, strict control over the structural and…
The modulation and characterization of the acidity of a vermiculite were carried out, which was modified by delamination by means of hydrothermal and acid treatments with the subsequent incorporation of AlZr and AlCe species to modulate the acidity. The effect of these species was evaluated regarding the structural (XRD, XPS and IR), textural (N-2 sortometry)…
Label free electrochemical sensors of glucose are used whenever long-term operation and stable response are required. For this purpose, various metals and oxides of the first transition series have been proposed as alternative to more expensive noble metal electrochemical sensors. In this work we propose a new formulation consisting of copper-cobalt mixed oxides which, in…