Micro-monoliths and foams made of aluminium, Fecralloy® and brass were studied as substrates for structured systems for methanol steam reforming (MSR). All the alloys exhibited very adherent oxide layer produced by pre-treatment to improve the adhesion between substrate and catalyst. 2.5% Pd/ZnO catalyst was prepared and deposited on structured substrates. Both, good catalyst adhesion and…
Gas-solid heterogeneous photocatalytic oxidation (PCO) of cyclohexane in humidified air over TiO2 and Pt/TiO2 catalyst was studied. Pt/TiO2 photocatalysts were synthesized by photodeposition method at different Pt loadings (0.5–2 wt.%). The addition of 0.5 wt.% Pt does not significantly modify the TiO2 properties. The increase in Pt loading induces to an aggregation of metallic particles…
In this work an in situ XRD and XANES study of two gold catalysts supported on iron-promoted ceria–alumina carriers was carried out during the water-gas shift reaction (WGS). The first catalyst, Au/CeO2–FeOx/Al2O3, was prepared using a commercial alumina support in order to obtain a Ce–Fe oxide solid solution and in the second one, Au/FeOx/CeO2–Al2O3, an…
The catalytic performance of a CuOx/CeO2 powder catalyst and that of a microchannel reactor or microreactor (MR) coated with the same solid was determined and compared. The catalytic activity measurements were carried out with varying O2/CO molar ratios in the feed-stream. In addition, the influence of the presence of CO2 and H2O in the reaction…
Heterogeneous photocatalytic partial oxidation of ethanol was studied over different Pt/TiO2 as an alternative green process for acetaldehyde production. The catalysts were synthesized through the photodeposition of Pt over sol–gel TiO2 with platinum loads of 0.5 and 1 wt.%. The effect of some experimental conditions during photodeposition, such as deposition time and Pt loading, was…
The general aspects of the synthesis and characterization results of a CuO x/CeO 2 catalyst were presented. In addition the principal steps for manufacturing a microchannel reactor and for the coating of the CuO x/CeO 2 catalyst onto the microchannels walls, were also summarized. The catalytic activity of this microchannel reactor during the preferential oxidation…
The main current theories dealing with the crystalline structures of the fluorite related rare earth oxides, including those corresponding to reduced oxides, one based on the distribution of the coordination defect inside the fluorite structure, and the other which proposes the establishment of modular sequences constituted by modules with fluorite structure, are presented and comparatively…
A CuO/CeO2 catalyst has been studied with respect to its catalytic activity for CO oxidation under stoichiometric conditions employing either O2 or O2–NO mixture as oxidants. The obtained results are rationalised on the basis of analysis of redox properties upon interaction with CO and O2–NO by EPR as well as by redox/catalytic analysis by operando-DRIFTS.…
We report herein the synthesis of an organic-inorganic hybrid composed by the ionic liquid protected Keggin structure, as a precursor for acid catalyst and its subsequent application in the methanol dehydration reaction. Special attention was paid to the thermal stability of the resulted hybrids as a function of the Keggin anion. The catalytic behaviour of…
A series of Zn-modified ceria solids were prepared by thermal decomposition of the corresponding metal propionates. The formation of segregated ZnO particles on the ceria surface is evidenced for these solids using X-ray diffraction; in addition to this the characterization data may allow discarding the formation of a ZnO-CeO2 solid solution. On modifying with Zn,…