A new approach is presented to produce amorphous porous silicon coatings (a-pSi) with closed porosity by magnetron sputtering of a silicon target. It is shown how the use of He as the process gas at moderated power (50–150 W RF) promotes the formation of closed nanometric pores during the growth of the silicon films. The…
A new type of nanostructured selective ultraviolet (UV) reflecting mirror is presented. Periodic porous multilayers with photonic crystal properties are built by spin-coating-assisted layer-by-layer deposition of colloidal suspensions of nanoparticles of ZrO2 and SiO2 (electronic band gap at λ < 220 nm). These optical filters are designed to block well-defined wavelength ranges of the UVA,…
In this work, a mechanochemical procedure is proposed as a simple and fast method to synthesize the pure BiFeO3 perovskite phase as a nanostructured material without the need for purification treatments, while the mechanochemical reaction mechanism has been investigated and correlated with that of the conventional solid-state reaction. Thus, different milling conditions have been used…
Clay-based minerals are considered to be an important component in backfill barriers due to both their ability to seal and adsorb radioactive waste and to interact chemically with it under subcritical conditions. Herein, we describe a systematic study of the properties of layered silicates that could affect their hydrothermal reactivity, namely type of layers, octahedral…
Gas-solid heterogeneous photocatalytic oxidation (PCO) of cyclohexane in humidified air over TiO2 and Pt/TiO2 catalyst was studied. Pt/TiO2 photocatalysts were synthesized by photodeposition method at different Pt loadings (0.5–2 wt.%). The addition of 0.5 wt.% Pt does not significantly modify the TiO2 properties. The increase in Pt loading induces to an aggregation of metallic particles…
The aim of this paper is to compare the mechanical and tribological properties of TiN coatings prepared in a conventional magnetron sputtering chamber according to two different routes: the usual reactive sputtering of a Ti target in an Ar/N2 atmosphere vs. the comparatively more simple sputtering of a TiN target in a pure Ar atmosphere.…
The conversion of thermally pretreated CaO along successive carbonation/calcination cycles has been investigated, as affected by looping-calcination conditions, by means of Thermogravimetric Analysis (TGA). Sorbent samples have been subjected in situ to a thermal preheating program based on Constant Rate Thermal Analysis (CRTA) by virtue of which decarbonation is carried out at a low controlled…
