A simple and precise linear integral method to evaluate the activation energy dependence oil the extent of conversion has been proposed. The method leads to consistent results with those from differential and integral non-linear procedure (Vyazovkin method). Moreover, the new procedure yields the pre-exponential factor and the kinetic model. The method was evaluated from isothermal,…
Titanium and silicon powder blends were ball-milled under an inert atmosphere and subsequently annealed in a nitrogen atmosphere. Ti62.5Si37.5, Ti55.6Si44.4, and Ti50Si50 mixtures suffered a mechanically induced self-propagating reaction during milling. The products of the combustion were Ti5Si3 for the Ti62.5Si37.5 mixture and a combination of intermetallic phases for the Ti55.6Si44.4 and Ti50Si50 mixtures. The Ti33.3Si66.7 blend did not show an MSR process,…
A simple and precise linear integral method to evaluate the activation energy dependence oil the extent of conversion has been proposed. The method leads to consistent results with those from differential and integral non-linear procedure (Vyazovkin method). Moreover, the new procedure yields the pre-exponential factor and the kinetic model. The method was evaluated from isothermal,…
The pathway for vanadium nitride (VN) formation obtained by milling treatment has been traced out. At the initial stages of the process, the reactant, vanadium metal, showing body-centered cubic (bcc) structure, becomes highly distorted. Simultaneously, the formation of a small nucleus of the product, VN, takes place. X-ray absorption spectroscopy (XAS) has allowed the quantification…
The crystal growth kinetics of antimony trisulfide in (GeS2)(0.1)(Sb2S3)(0.9) glass has been studied by microscopy and DSC. The linear crystal growth kinetics has been confirmed in the temperature range 492 <= T <= 515 K (E-G = 405 +/- 7 kJ mol(-1)). The applicability of standard growth models has been assessed. From the crystal growth…
A critical study of the use of isoconversional methods for the kinetic analysis of non-isothermal data corresponding to processes with either a real or an apparent variation of the activation energy, E, with the reacted fraction, alpha, has been carried out using for the first time simulated curves. It has been shown that the activation…
Thermal behavior of talc samples (from locality Puebla de Lillo, Spain) were characterized by emanation thermal analysis (ETA), DTA and TG. The ETA, based on the measurement of radon release rate from samples, revealed a closing up of surface micro-cracks and annealing of microstructure irregularities of the talc samples on heating in the range 200-500 degrees C. For ground talc sample a crystallization of non-crystalline phase formed by grinding, into orthorhombic enstatite was characterized as a decrease of radon mobility in the range 785-825 degrees C…
El objetivo principal del proyecto implica la utilización de un molino planetario de alta energía de molienda, diseñado en colaboración con la empresa andaluza MC2, Ingeniería y Sistemas, S.L., que permite controlar la atmósfera durante la mecanosíntesis hasta presiones de 20 atmósferas de cualquier gas inerte o reactivo seleccionado, para la síntesis mecanoquí-mica directa de…
The transition metal nitride ternary show similar properties to the binary nitride and some times this behaviour are improved. In the present work, the molybdenum-iron nitride has been prepared by reactive grinding from the two metals under nitrogen atmosphere at a pressure of 11 bar. The characterization of the compound is presented and it is…
