Valorisation of rice husk ash as an activator in the preparation of alkali-activated cements based on electric arc furnace slag

Rice husk ash (RHA) was employed as a silica source to produce an alternative sodium silicate solution through the dissolution of varying quantities of RHA in an 8 M NaOH solution. The solution was employed in the production of alkali-activated cements based on electric arc furnace slag (EAFS). Solutions were prepared with varying activator modules…

Effect of olive-pruning fibres as reinforcements of alkali-activated cements based on electric arc furnace slag and biomass bottom ash

In this work, alkali-activated composites using electric arc furnace slag (50 wt%) and biomass bottom ash (50 wt%) were manufactured, adding olive-pruning fibres as reinforcement. The objective of adding fibres is to improve the flexural strength of composites, as well as to prevent the expansion of cracks as a result of shrinkage. For this reason,…

Synthesis and characterization of alkali-activated materials containing biomass fly ash and metakaolin: effect of the soluble salt content of the residue

The present study investigates the production and characterization of alkali-activated bricks prepared with mixing metakaolin (MK) and biomass fly ash from the combustion of a mix of pine pruning, forest residues and energy crops (BFA). To use this low cost and high availability waste, different specimens were prepared by mixing MK with different proportions of…